Product Introduction
The air box pulse dust collector is a high-efficiency dust collector at the advanced level in the 1990s. It combines the advantages of various bag dust collectors such as divided chamber backflush and jet pulse dust cleaning, and overcomes the shortcomings of insufficient intensity of divided chamber backflush and dust cleaning, and simultaneous injection and pulse dust cleaning and filtration. This expands the application range of bag dust collectors. Because the structure of this type of dust collector has its own characteristics, it improves efficiency and prolongs the service life of filter bags.
The air box pulse dust collector can be widely used in dust collection systems such as crushing, packaging, warehouse roofs, clinker coolers and various mills in cement plants. For example, when used for dust collection in coal mills, fire and explosion protection must be added. Measures, the structure of the dust collector has been changed accordingly, and it is also suitable for dust collection of gases with extremely high dust concentration, such as grinding systems with powder washers, where the gas dust concentration is up to/above, this series of dust collectors can be used to collect dust. It is not necessary to set up a cyclone dust collector for primary dust collection. In addition to being used in the cement industry, it is also suitable for collecting dust from waste gases such as metallurgy, chemical industry, machinery and civil boilers. The filter bags of this series of dust collectors are generally made of polyester needle felt, and the allowed operating temperature is less than ℃. If the filter bag is made of aramid needle felt, its allowed operating temperature can reach ℃. But the filter material of this material is expensive. If the temperature of the waste gas being processed is higher than the allowable temperature of the above filter material, cooling measures should be taken before the waste gas enters the dust collector.
The air box pulse dust collector is an outdoor type and consists of various specifications with different numbers of chambers and different numbers of bags in each chamber.
The number of bags in each room is divided into four types: Japanese and Japanese. The whole series has two specifications, the diameter of the filter bag is 1, and the length of the filter bag is 2.
The air box pulse dust collector can operate under negative pressure or positive pressure without any change in the basic structure. Its dust collection efficiency can reach more than .%. The dust concentration of the purified gas is less than the main technical performance of this series of dust collectors. See table, table and table respectively. If this series of dust collectors is used in cold areas, when the outdoor heating temperature is ℃, if a heating device is added, the dust collector casing must also be changed accordingly.
Inquiry phone number
Ms.
Manufacturer's best-selling PPC air box pulse dust collector, pulse bag dust collector, professional customization and low cost